Acid stain concrete

Concrete should be fully cured before applying acid stain , so if your surface is new, wait a minimum of days before staining. Like stains for woo acid -based stains are translucent and the color they produce will vary depending on the color and condition of the substrate they are applied to. Other articles from concretenetwork. The key of course would be to have either a professional who is very experienced with this technique to do the job for you or. I was faced with making this decision a few month ago.

First to get a good acid stain , the floor must be relatively free of any cracks. Any cracks on the concrete will need to be filled and this product will always show , and not take the. Hi- I had acid-stained concrete floors in my last home - they were awesome! But, my 3- or 4-yr.

We thought it was cute, until we pulled the. The biggest expenses involve the acid stain and a sealer. My concrete patio is 2square feet and the total cost was about $135.

I already owned a pressure washer and had ammonia, a pump sprayer, and painting supplies. Reacting with the minerals already present in the concrete and that were randomly dispersed when it was poured and finishe highs, lows, dark and lights, mottling and marbling is a natural effect of the process. When I did my first room, I decided to be lazy and NOT mask the bottoms of the walls.

My big idea was to use a foam brush to apply the stain around the edges of the room, and then follow up with a sprayer in the middle areas. Every concrete floor will react with its own unique pattern. Acid Stain is to concrete much as wood stain is to wood. Once sealed with clear sealer, your floor will pop with an elegant look.

For acid staining , use a concrete etch and cleaner to prepare the surface and rinse well. Concrete must be porous enough to accept water. Acid staining is a tedious process. Dense concrete surfaces may require mechanical preparation to accept acid stain. Mask for over-spray with masking tape and water-resistant construction paper.

Duct tape over masking tape to prevent stain. Each concrete acid stain creates uneven color effects that simulate the natural shadings and aged appearance of stone or masonry. Concrete Stain s and Sealers - Discounted and Shipped to You! They have been almost entirely replaced by dyes. These dyes are mixed with a carrier, such as an alcohol and sprayed onto concrete.

Apply an appropriate concrete sealer on top of concrete stains for the greatest longevity. Multiple wet colors can meld and flow creating wonderfully unique patterns. ACID STAIN is produced in stylish colors (see color chart) and creates varied color patterns on concrete by chemicals reacting with the cement on the surface of the substrate. Every concrete floor contains different amounts of minerals and varying porosity, resulting in more vibrant colorations and shades on the same floor.

The process is still the same: clean and prep your old concrete as outlined above, apply the stain , let sit the appropriate amount of time, then neutralize. For years, stained concrete contractors have used acid stains to achieve rich, earth-toned color schemes resembling natural stone, marble, woo or even leather. Wet the concrete surface once again and soak any surrounding grass or shrubs.

Then sprinkle the acid solution onto the concrete. It should bubble on contact. Our concrete stains provide a simple way to not only add color and style, but also help protect the surface.

Free 2-day Shipping On Millions of Items.