Landscape timbers installation

Step 3: Save Time And Money. What are some alternatives to landscape timbers? How to build steps with landscape timbers? What kind of nails to use for landscape timbers?

Landscape timbers come in a few different shapes. They are easy to cut with a circular saw or chainsaw to edge any size flowerbed or walkway. Some common uses for timbers include flowerbeds, borders and retaining walls.

Each of these uses requires two means of support. The first is a way to hold the individual timbers together and the second is a means to secure it to the ground. Your New House 8views. Before you head to your nearest Home Depot, you have to know how much timber to buy. Using edging stakes and yarn, measure out your flower be gardening path, etc.

Make sure you hammer the stakes in the ground and tie the yard as tight as possible. These wood landscape timbers add a natural yet practical accent to any yard or garden. They make excellent and safe retainer walls, borders and planters.

They can be painted or stained and are pressure-treated to withstand termites, fungi and rot. Treated wood is typically still wet when it’s delivered to The Home Depot or job site. Great Lakes Prepping 32views.

Timber Screws These large screws are similar to landscape spikes but are threaded to ensure a more secure hold. Get the drill and drill some holes through both layers of the landscape timber edging. Drill holes on all four corners and more holes every feet.

Unfinished surface. Quantity includes typical waste overage, material for repair and local delivery. In similar fashion, cut timbers to appropriate length, lay in place, and level. Shims can be inserted where needed to make timbers level.

For top course, use spikes with a finished head for a more attractive look. Use landscape marking paint to outline the area where the retaining wall will be built. Drive stakes into the ground at each end. If the distance is greater than 8’, drive additional stakes so that the gaps do not exceed 8’. Tie a string to a stake at the wall’s desired height and stretch across to opposite stake or stakes.

After installing the third course of timbers , make a T-shape dead man (tie-back) from two short lengths of landscaping timber. Dig out a T-shape trench into the hillside behind the wall and lay in the dead man. Fasten the dead man to the retaining wall with two landscaping screws. Then stake the dead man to the soil with two. To assemble the timbers , drill pilot holes for 12-inch spikes completely through the front face of the outside timbers and about inches into the side timbers.

Drive the spikes with a small sledgehammer. At the corners of the rear timbers , center a mark on the top face, about inches from the ends. Mark the middle of the timber also.

Holding the timbers in place and securing them to each other requires sturdy hardware. There are several nail and spike options that work well with landscape timbers.