Barn door dimensions

What is the standard size of a barn door? Most barn door sizes fall anywhere between 36” wide (on the shorter side) by 96” tall (on the longer side). How heavy is a barn door? Generally, most standard barn doors are approximately 36” X 84” or 42” X 80” – with enough extra lip to overlap most standard door frames (36” X 80”) by an inch or so.

Add 1″ to 2″ per door for overlap depending on privacy needs. Height: For the door height we recommend measuring from the floor to the top of the casing. In this example the total.

Stellar recommends a minimum of 14’ x 14’ for the door and a barn at least 40’ x 60’ x ’ for just trailer storage. If you want to store tractor and trailer, go with a 40’ x 80’ x 16’ pole barn. RELATED PRODUCTS in. Since the door sits off the wall in order to slide, it must be wider that the opening to fully hide the opening. The height is a bit trickier based on the casing and header.

For overhead garage doors, a general rule of thumb is to maintain a minimum of feet between doors, as well as from any building corner. For example, using this rule, you could place three 12-foot wide doors on a 44-foot wall. To calculate this, simply add the width of the doors together (3x12=36) and subtract this from the wall length (- 36). Free 2-day Shipping On Millions of Items. The barn door you choose needs to be slightly larger than the opening of the door frame it will cover.

Add – to this measurement, so your barn door completely covers the entryway without drafts or slight openings. To determine the door width, add at least two inches to the width of the opening or to the outside dimensions of the door trim. Pro tip: Sliding doors should extend at least an inch beyond the sides of the opening that don’t have trim or an inch beyond the moldings of openings with trim. You can add more overlap for extra privacy. This allows you some flexibility for larger door openings or double- door setups.

Our measurement came to inches. Next, you’ll want to determine the height you want your door to be. We settled on inches. When you think of a pole barn , you likely imagine it with a traditional sliding door.

As one the most cost-effective solutions, sliding doors are simple and very popular for pole barns used for livestock or horses. They’re available in either single, full doors or two split doors that meet in the middle. Sliding barn end (breezeway) doors , hayloft doors , and Dutch doors for turn-out paddocks - you can find them all here, in multiple sizes and styles to suit your needs. We offer all wood doors , made from our high quality Barn Pros timber, as well as steel-framed doors which can be finished with a range of colors and wood fill options. When making a selection below to narrow your down, each selection made will reload the page to display the desired.

Shop A Wide Variety of Door s Today. Nominal Door Height. Step 2: Find the Right Width.

You will usually just want the sliding barn door to be just an inch or so bigger than the height of the opening. Residential doors are available in most standard widths to 14′ tall. Measure the Opening. Commercial doors are available (although rarely needed) in taller heights.

To safely fit on a wall of most buildings, the door should be no more than 2′ lower than the building. Shop Custom Barn Doors of ANY SIZE. Full Assembled Barn Door at $425.

And they all dont need to be the same. Functionally, they are big space savers. Barn doors come with both functional and aesthetic benefits. The traditional swinging door typically needs feet or more of space to function properly. While this may not be an issue for large houses, more space-starved homes will find it more than a little problematic.

The Barn Door Store installers put in our new doors today and we are thrilled with how they look. This is the second time we have used them to design custom doors. From the design to the install their team was excellent to work with, patient and professional.