How do you mount an electric fan to a radiator? How to properly wire electric cooling fans? What are electric fans used for? Electric Cooling fan for your radiator NOT to overheat. FLEX A LITE fan from NAPA Auto parts in USA.
It’s probably best to purchase a universal fan mounting kit from an online store. Bolt the electric fan up and make sure you have the exact set up you want. After that you may want to remove the bolts one at a time and use some locktite on them. Assembling the fan brackets and thermo knob 1) Using the screw, washers, and nuts in the mounting kit bag, attach the large top bracket to the top of the electric fan shroud.
Again, using the screws, washers and nuts provide attach the bottom aluminum bracket to the bottom of the electric fan shroud. The first part of the installation is to install the electric fan to your radiator , and remove the mechanical fan. If your mechanical fan had a fan spacer, it can be removed with the fan. Rodz Hobz 122views. Summit Racing 10views.
Automotive electric fans are also better in traffic because they can switch on if your engine gets hot. Engine mounted fans are less effective in traffic because they pull little air when the engine RPM is low. If engine to radiator clearance is a problem, some electric fans can be used as a pusher fan and placed on the grille side of the radiator. Get the gauge wire and place it through the hole in your fire wall.
This will be the wire that connects your switch to your fan power wire. So now we have a wire that goes through the engine bay to the cabin of your car! Now take the power wire from your fan and connect it to the wire that is going through the firewall. Pusher-style fans mount on the front of the radiator and blow air through the radiator core.
Puller-style fans mount behind the radiator and draw air through the core. A pusher-style fan can be used as an auxiliary cooling source, but you should sure make the fan covers as much of the radiator core as possible. Either way, this document will help explain the proper way to install and wire your new e- fan. The modification I am talking about is the electric fan.
The brand name is Flex-A-Lite and the kit is COMPLETE. Determine the ceiling slope by holding a 2-ft. Knock out the old box and install a fan brace.
Shut off the power at the main panel and remove the light fixture. This fan control kit can be used with single fan or multiple fan applications as long and the combined current draw does not exceed amps. Install the ceiling. For best mount the relay in as close proximity to the electric fan as possible. Attach each fan blade to a blade iron (the bracket that holds the blade to the fan ). Then, fasten the blade irons to the motor with the screws provided.
Thanks for the link. Is installing the harness pretty straight forward? Also, what is an alternator overdrive pulley? Is this necessary when installing electric fans ? Theres is a ton of differnt ways to install an electric fan.
There is no perfect fan but there are many that work more than hard enough to keep the engine cool. Having had the truck to the local track several times before and after the e- fan install I can honesty say that the e- fan was good for a consistent mph and. All that sai for most of use I think an electric fan can provide a better experience.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.