How to paint laminate furniture without sanding

How to repaint laminate furniture? How do you paint wood laminate? Check to make sure your laminate is in good condition.

Clean your cabinets thoroughly with Krud Kutter to remove any kitchen grease or dust. Leave the cabinet doors attached to the frames for now. Use a roller to apply. Wipe down all surfaces to be painted with white spirit using a lint free cloth.

Roll on coats of a shellac based primer (check drying times between coats on the tin). First coat of chalk paint on. Using Zinsser Cover Stain oil-based primer is the key here.

It’s the only primer any of the big-timers use and I have to agree that it worked great. It’s the key for painting without sanding and for painting laminate furniture. At around $for the gallon, it’s well worth the time you save on sanding. Laminate is a type of plastic.

If you can get a piece from some broken furniture you can test paint it and see how it turns out. Check along the road on trash day and you might find some. I would prime it, then paint it. Well I know what will give it a factory finish, but may be more involved than you care for. I made some cabinets for my garage and many people thought they were metal because they were so shiny.

You need to clean it up. Anyway, use a high. I used a very affordable. If you really want to know how to paint laminate furniture without sanding, this is it. But, as you know I always recommend some sanding, or light scuffing simply because I feel like you will never regret a good prep.

Look for an oil-based bonding primer at your local hardware or paint store. Apply the primer using a brush or roller until there’s an even coverage on the entire surface of the furniture. All colors in stock, order online.

Low flat rate shipping, $37. Free 2-day Shipping On Millions of Items. The grain will be clearly visible, especially because you haven’t sanded your furniture.

Dip the paintbrush in the bucket of paint and rub off any excess paint. Then paint lightly in the direction of the wood grain. When you paint, you’ll first start out by using a paintbrush – probably an angled one – to paint in the crevices of one area of the bookshelf.

Slick Stick acts as a primer for laminate furniture and is made to stick to shiny surfaces like this new Pottery Barn Bookcase. You’ll immediately follow up with a foam roller. Just continue painting in sections until you finish coating the entire piece.

Begin by sanding the laminate. Be sure to use the correct protective gear (a mask and safety glasses). I personally take a 1grit piece of.

Get most of the dust off with a vacuum and then a damp paper towel or cloth. I recently started wiping. Enter Zinsser Cover Stain Primer. It's designed to stick to any surface without sanding.

This primer is like magic. Using the deglosser, apply with a paint brush over the surface of the wood. Allow it to penetrate the wood for minutes.