Measuring carpet for stairs

How do you calculate square footage of carpet? How much carpet will you need? You must take into account the rise and fall of each step on the staircase when you measure carpet on stairs. Knowing the proper measurement will prevent you from purchasing too much or too little carpet. While you’re measuring the width of the landing, bend the tape measure and measure the height of the riser directly beneath it.

Include an inch or two extra to wrap around the nose. Rise: height of the step. Run: length of the step. Multiply that by the number of stairs. Divide by and round up to get the number.

It is one of the first steps before shopping for carpet to install yourself or providing installers with the needed dimensions. Making measurements most often applies to broadloom wall-to-wall carpet. Luckily, our stairs carpet calculator takes the guesswork out.

For stairs , measure one stair tread from one side to the other side of the rail (or wall) and then round it off to the nearest foot. Then, measure the stair riser from the bottom to the top of the tread and round off to the nearest foot. Calculating square footage for most rooms in your home is straightforward.

Just measure length and width and multiply. When it comes to carpeting stairs , the calculations are a little more involve but still doable. With so many options to choose from, the process can be overwhelming. Carpet replacement is a big job. Below, we’ll break down some top considerations for choosing the best carpet for your home and lifestyle.

This total measurement will be the length for one stair. The most economical way to fit a stair carpet is to use the width of the carpet cut in strips across the width and fitted to the stairs with joins where the riser meets the step. Measuring Your Stairs. To calculate the length of the staircase for a runner, you need to. Also see our other videos.

Here you will learn the basics of measuring. We always recommend that you ask a fully qualified carpet fitter to measure your area to be carpeted to avoid costly mistakes. The Stair Calculator is an online tool for calculating various parameters involved in the construction of stairs.

Refer to the figure adjacent to the calculator as a reference. A fraction to decimal conversion table for common fractions used in measurements is also provided at the bottom of the page. Some stairs are wrapped over one or both sides, some have to be upholstered which may require additional material, some are pie shaped and are very difficult to measure, some have landings that must be considered. The first step to finding out exactly how much carpet you need for your stairs involves measuring each tread. Use a tape measure, take an accurate measurement of the width and depth of the tread.

The tread is the flat horizontal part of each step, which you stand on when using the stairs. One of the more difficult pieces of carpet to estimate is stairs. Each stair is made of the tread (the part that you stand on) and the riser (the flat part at the back). Most stairs have an eight-inch riser and a ten-inch tread and are inches wide, so each step is 4. Your stairs should all be the same size so you’ll only need to measure one of them to know how to work out carpet size.

Here is the easy way to work out measurements. There are three measurements you need to make when you’re measuring stairs for.