How to finish furniture

What is the best finish for furniture? How to refinish old furniture? After you clean your furniture piece and do any necessary repairs and stain touch-up , wiping on a coat of finish will restore the sheen and protect the surface.

Any wipe-on finish will work—Minwax Wipe-on Poly is a common brand. Use Helmsman Spar Urethane because it is waterproof, approved for use indoors and outdoors and prevents fading if your dresser is exposed to sunlight near a window. Start by staining the. Go to Home Depot and ask them what product is the best to use and ask them if they have any demonstrations you can go to. They spend a lot of time teaching people how to do these basic things.

Finishing wood is an art and but they now have. The Right Way Sand down the table to remove current finish. Or 2: What I would do Buy white spraypaint. Take table outdoors, on grass or soil.

Wrap sides of table with. Use a sanding machine or 100-grit sandpaper to thoroughly sand the furniture. Work in even strokes and spend the same amount of time on each part of the furniture to ensure an even finish.

Use a finishing sander to go over the surface again and create a completely smooth surface. The last step after staining or painting is to apply a coat of wood finish. There are several options for wood fishes: oil finishes, lacquer and polyurethane are a few options. On bare woo lightly sand the surface with 150-grit sandpaper to remove nicks, scratches, and to open up the pores. Wipe off the sanding dust with a tack cloth.

Brush on wood conditioner prior to staining. Allow the conditioner to dry for minutes. Put on rubber gloves and. In most cases, how a piece of furniture stands up to wear is as important as how it looks.

Durability is a primary consideration in choosing a finish. Felt-tip touch-up markers come in a variety of wood tones to match common furniture finishes. Use them to color large scratches or edges where the stain has worn away. Apply only to damaged areas, and wipe immediately if any gets on the neighboring finish. The first step in protecting an old finish is to clean it with a mild furniture cleaner and a soft cloth.

Avoid harsh solvents or steel wool. After the cleaner has evaporate apply a thin coat of high-quality furniture paste wax. Wait about minutes, or until the wax begins to harden, and buff vigorously with a clean, soft cloth.

You can also use a foam brush that is about inches (cm) wide. You will want to apply several coats of finish to your wood. Choose the Right Finish : Just as a long-sleeved shirt provides protection from sunburn, multiple coats of an exterior finish help protect furniture from UV rays as well as moisture. Since paint blocks UV rays better than a clear finish , your best bet is to apply a quality exterior primer, topped by a exterior latex or oil-based paint. For small projects, aerosol spray paint stripper is really convenient because it’s easy to control and won’t spill.

You’ll see the old finish start to lift up off the wood. Then any excess is removed by rubbing and buffing with a rag. Several coats are applied. Small scratches and defects can be easily repaired by simply sanding the defect and rubbing more oil finish in the affected area. Spread the finish on the woo not worrying about brush strokes or going with the grain.

Just get good coverage and use the brush to work the finish into all the pores and crevices. Finish by tipping off: making long, soft brush-strokes over the area you just covered. Go in the direction of the wood grain. This technique produces a professional looking result.

For wood finishing, you should use only boiled linseed oil. Tung oil is derived from the nuts of trees that are native to Asia but have been cultivated in other parts of the world. Tung oil is available in a pure, unrefined form and in a heat-treated or polymerized form. If your furniture has knicks and dings, now is the time to patch and repair them and sand any blemishes smooth.

Semi-gloss: This might be the best paint finish for furniture , since a semi-gloss paint reflects light well and stands up to washing and the demands of increased use. The greater concentration of resins in a semi-gloss formula make this paint more durable for furniture you actually plan to put to work. Apply a few drops of denatured alcohol to the furniture , as shown in the photo above. Step Rub a small amount of linseed oil, using the cotton swab, into an inconspicuous spot on the furniture or trim.

If the oil absorbs into the woo the finish is likely oil. If it beads, the finish is shellac, polyurethane, lacquer or varnish. Free 2-day Shipping On Millions of Items.