How to restain a deck

How to revive a deck? Do I need to sand my Deck before I restain it? Soak the ground around bordering plants to minimize damage due to run-off , and cover with plastic to protect from. Cover glass and metal with plastic to protect.

Protect your plants growing around the deck and put on some protective gear As you’re going to work with harsh chemicals. Strip the old finish Read. Pressure washing, the standard in deck cleaning, efficiently removes dirt, old stain, and debris from wood. Most pressure washers can be used with trisodium phosphate (TSP) or other deck cleaners for an even better result. To keep your deck looking great, refinish at the earliest signs of wear.

The biggest challenge for re-staining a deck is to make sure it’s clean. Sweep it thoroughly and use a screwdriver to clean out debris from between decking boards and butt joints. Tips on planning, preparing and applying deck stains, plus easy steps on how to clean up. Before you begin your project, make sure you start off right. Sprinkle water on the deck.

If it soaks in immediately, the deck can be sealed. If the water beads up or stands on the deck, your deck may not need sealing yet. You don’t want to be applying stain on top of that. A pressure washer is the fastest way to blast away all the dust , dirt , oils , and grime from a deck. Perfect Way to Choose Your Paint Color, Hassle Free.

Restaining a deck is one of the best ways to maintain the condition of your deck and ensure it lasts a long time. While knowing how to restain a deck isn’t it a very enjoyable endeavor, it’s a great one to do because you see the immediately. Thoroughly vacuum the deck , then apply staining sealer to all deck wood with a pressure sprayer or paint roller.

Treat the understructure first, then exposed surfaces. Start by sanding splintered spots, wearing a safety mask to avoid inhaling the dust. Sweep the deck and use a putty knife to clean between the boards. Start in a corner and work your way out across the deck. Pull the trigger on the power washer handle and hold it.

Switch to the floor sander to sand the rest of the deck , again using the 40-grit sandpaper. Repeat this process with the 60- and 80-grit sandpaper. Pour the penetrating oil into a bucket. Once you’ve scrubbed the entire deck, use your garden hose to rinse it off well.

Allow the deck to dry. If you are using a water-based. Clean and scrub the deck. That’ll knock down any raised wood fibers and give much smoother finish. Blow off the sanding dust with a leaf blower and you’re ready to stain!

Mix a solution of deck cleaner and water according to instructions and apply using a stiff brush. Work in manageable sections and rinse each area with clean water once it has been completed. Regardless of which method you choose, you will need to allow the wood to dry before applying the new coat of stain.

If you have a large deck, work in small sections. With a pump sprayer,.