How to restain a table

I recommend the use of a chemical stripper with protective gear and good ventilation. Messy, but effective, reliable and quick. How do I stain a table? In order to stain it to match the other pieces in the room it would first have to be taken down to bare woo and that is most easily accomplished using a chemical stripper, which is. In other words sand it enough to remove the top surface oils, any finish, dirt, etc.

It is not necessary to sand the original stain out. Combine parts water with parts ammonia. Dampen a cloth in the solution and wipe down the entire table , including. Sand lightly with the. If using an orbital or belt sander, be careful not to gouge the surface.

Do most of the initial sanding and varnish removal with the 100-grit sandpaper, then step up to 150-grit and do a final pass with 220-grit to smooth out the grain for the new finish. I simply sprayed it on and wiped it off. It took about minutes to clean the entire table.

First, sand off the old finish. You might also consider routing the edges of your table to match other furniture in the dining room. Next, clean all dust from the table and apply the stain. The experts at DIY Network provide instructions on how to strip, sand and stain a piece of wooden furniture. Next, sand the table with the 150-grit paper, and finish by sanding with the 220-grit paper.

Wipe the surface of the entire table using the tack cloth. Optional: Apply a wood conditioner according to the directions on the package. Free 2-day Shipping On Millions of Items.

Keep in mind: Price and stock could change after publish date, and we may make money from these links. Begin with coarse grit sandpaper (80), then progress to a finer sandpaper (from 2to 3to 420). Use cloth and tack cloth to remove all dust particles from table before applying wood conditioner. Condition the Wood. Stir the conditioner thoroughly before.

Allow the table to dry thoroughly for at least two hours before adding the wood conditioner. Wipe down the table with a slightly water dampened rag, making sure to remove all of the dust caused by sanding. Apply the conditioner to the table using a rag or foam brush. Cover the entire table. I only did the top, just to get a little more life out of it.

Use a paint brush to apply an even coat to the wood surface. Let the stripper do its. STEP 2: Remove the finish. After the specified amount of time, use a plastic scraper (putty knife) to begin removing the.

For small projects, aerosol spray paint stripper is really convenient because it’s easy to control and won’t spill. You’ll see the old finish start to lift up off the wood. Instructions Use KleanStrip Stripper to remove the old finish with a chip brush.

Use a plastic paint scraper to scrape away the old finish. A wire brush is needed to scrape away the finish from the table edge. Scrub it into the wood. When brushing it on, go with the grain of the wood.

Allow the stain to soak in for a few minutes and then wipe off the excess with a cloth. Some woods, such as birch and knotty pine, take stain unevenly and need a coat of wood conditioner to ensure color uniformity.