How to replace sliding closet doors

It can be done, but it will be a lot of work. I have never seen a double door frame before, so you will have to make it from scratch. Then you will have to buy two doors the correct size to fit the opening and do all the hinge mounting. The prehund may be your best bet.

Take your measurements to Lowes or Home Depot and they will give you your best shot. Any installations made by their installation contractors is. How to repair bifold and sliding doors? How do I fix the closet doors? Remove the old door.

Pop the door rollers off the track, unscrew the track from the header and remove it. Using a pry-bar or claw hammer , pull all the trim and casing off the old door opening. Before you replace the doors , you should first look at your hardware.

Sometimes , the doors. If you discover that it is not the hardware that needs to be replaced , but you need to replace. Step – Choosing Doors. Once I took out the old molding, I had to put in a “filler piece” to lower the top of the doorframe to be level with the door molding at the top.

To take the door out, you’ll lift it out from the bottom track. To make space to maneuver it, you will loosen the brackets on the back. Use the Philips or flathead screwdriver to loosen each screw on the brackets at the top of your door.

If your doors hang from a top rail and do not have a track on the floor, then you need to either replace or tighten down the floor guides. Use a drill to unscrew any hinges or tracks from your closet opening , and take off the old doors and set them aside. When you’re finishe the opening to your closet should be free of any obstructions. Use a tape measure to measure the distance between the floor and the top of your closet opening to get the height. Measure the height several times so you know your measurement is accurate.

There are a variety of options for the repair and replacement of bifold closet doors. The cost varies with size, materials and labor, but even the most expensive are quite affordable. Shop Sliding Doors and Save Today. Free 2-day Shipping On Millions of Items. This video shows details of how to: - remove the old sliding doors - frame the.

Bypass or sliding closet doors slide on an overhead track. If something damages the track or the sliding mechanism, the doors won’t operate properly. Look at the bottom of each closet door to locate wheels that rest on the bottom track. Find the adjustment screw and rotate it with a screwdriver, Phillips or slotted depending on model, to bring.

This will be the easiest part of the job. Simply grip each door at the sides and lift. Angle the bottom of the door toward you while you let it down, and the wheels should hook right onto the track. Apparently I’m not the only one with a mad hatred of those clumsy bi-fold doors ! If you have a sliding closet door that glides on a bottom track, clean the track with a damp cloth to ensure smooth gliding.

Lubricate the rollers but not the track, because lubricant will act as a magnet for dust. If a roller is stuck, unscrew and remove it. Then compress the door (like a sandwich), lift up from the bottom, and remove the door from the bottom brackets.

Then tilt the door until you’re able to remove it from the track attached to the top of the door frame. Mirrored closet sliding doors are an ideal way to create the feeling of more light within your space, since they reflect all of the natural sunlight emitting through your windows.