How to program your digital thermostat? Fix the mounting plate of your new programmable thermostat to the wall. It may be necessary to drill pilot holes and use plastic anchors.
Next, match letter to letter as you connect the wires to. Remove the existing thermostat base by loosening the mounting screws. Separate the front of the new thermostat from the base. Begin by installing the base first. Thread the low-voltage wires through the specified opening of the new thermostat base.
Use a level to make sure the base is as straight as possible. In this video, This Old House plumbing and heating contractor Richard Trethewey explains how to install a programmable thermostat. Turn off service switch at boiler.
Pull off cover from existing thermostat. Unscrew thermostat from its wall-mounted sub-base. Loosen wires connected to thermostat ’s sub-base.
Follow the instructions that come with it to the letter. They adapt to most if not all systems, but you have to make sure all the wires are going to the proper places. They really can help you save on your energy bills by controlling the. It should wire up to the new one essentially the same, your directions should give you complete instructions on wiring this or if you need perhaps an additional wire to jump from one terminal to another. Install it yourself and save lots of money.
Works great wasn't hard to do either. I installed one at my house over two years ago. They give instructions with the unit. My thermostat was a 7day programmable and was around $50.
Following these simple steps you would have any thermostat installed in less than minutes. Because of all the benefits this simple home improvement can provide, learning how to install a digital thermostat is worth the effort to save money while making your home comfortable and cozy. Looking For Thermostat manual? We Have Almost Everything.
The first thing that you need to do, before you install a programmable thermostat , is to make sure that you buy the right one. Some have control voltages of 1volts or more, and some come in around volts or less. A programmable thermostat offers more control options and saves on home heating and cooling expenses. It allows you to set different temperatures for different times of the day, and even different times on different days.
To attach the wires you’ll want to strip off the plastic coating and separate the wires. Attach them to the new thermostat according to the manufacturer’s instructions. Once the new wall plate is in place, match the wires to the thermostat terminal and connect them as per the instructions or diagram provided by the manufacturer. Place the new thermostat cover over the backplate.
The owner’s manual will include some guidelines, but the main thing to note is that the wires on your new thermostat match the color codes for each wire in your wall. Just match the correct wires to the terminals on your programmable thermostat to install your new device in a proper manner. Your labeled tape on the wires from Step will help. Mark the wall through the mounting holes on the base. To see if your programmable thermostat contains mercury, check with the manufacturer.
Or you risk literally being stuck in the cold! Reading instructions is a total drag, yes. But this is not something you want to mess up! Read them and study the pictures.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.