Replace plug on cord

How do you replace an electrical plug? How to put a plug on a cord? INSERT CORD THROUGH ASSEMBLY CLIP. Align either side of the cord with side of wiring channel marked with a “W. Insert cord through assembly clip and into wiring channel up to cord-stop ribs.

PUT CORD IN WIRING CHANNEL. Press down on cord to seat in wiring channel. CLOSE THE NEW PLUG. Most hardware stores will have replacement plugs in their electronics sections or near the extension cords. Make sure you match the new plug with the type of cord you have.

Get a 3-pronged plug for a 3-pronged cord , and a 2-pronged plug for a 2-pronged cord. Slide the new plug over the cut end of the cord and out of the way for now. Cut off any damaged portion at the end of the cord.

Some plugs have two parts, with one piece containing the wiring connections and prongs and another piece that is an outer shell or body. The wiring just above the plug can get damaged when you insert or take the plug out of wall sockets. By cutting the cord shorter, you avoid potential trouble spots.

Squeeze the two prongs of the new plug together (like you squeeze tweezers) so you can pull them out of the casing. First, cut off the damaged plug. Over time, the cord around the lamp plug may get damaged and stop working. If you have a damaged lamp plug , try to replace it as soon as possible to reduce the risk of shock or electrical fire.

The same steps are applicable if you want to fix an extension cord as well. If your wire has a ground wire, put it under the. Simply cut the wire an inch or two away from the plug, using wire snips. If the pigtail cord or the appliance is not color-code first attach the center wire of the pigtail to the center terminal screw on the appliance, and then connect the remaining wires to the other. How To Replace a Plug on a Damaged Power Cord.

O ccasionally the plug on a lamp cord or some other device will become damaged. It is fairly easy to replace and should only take a few minutes. When replacing a plug , be sure to select a replacement that is the same as the one being replaced and with the same rating. Follow these simple steps to replace a socket or plug on an extension cord.

Make a shallow cut lengthwise through the outer jacket, then lightly score around the cord until you can break the jacket off. Twist the wires tight, then. This setup is an american 1volt end.

Many other types will install similarly to this. You can buy electrical plug ends at various. No matter how you plan on doing the repair , cut off the damaged portion first. For a simple, straightforward way to repair a cord , fit it with a new plug. You may want to use a rubber sealant in order to completely enclose the wire and prevent accidents.

If there is a cut or fray in the cord , you will want to replace the cord altogether. Step - Replace the Power Cord. Fix for a Damaged Cord. Accidentally cut your goo heavy-duty extension cord ? Instead of splicing, add a new plug on the piece of the cord with the receptacle and a new receptacle on the piece of the cord with the plug.

Replacement cords are expensive, and you can save money by just repairing it.